有限深圳-惠州25-4油田综合调整/惠州19-6油田5d井区开发项目往复式注水泵 - 国际招联网 标澄清或变更公告(1) 联网

澄清或变更简要说明：原公告中：1）在有效期内注水泵（往复式）制造商唯一授权书原件。对于投标文件中提供制造商授权书的中标候选人，中标候选人公示期间将公示其制造商授权信息。投标文件中提供制造商授权书的中标候选人应在中标候选人公示后3个工作日内将制造商授权书原件（签字或人名章或公章均须为原件，不接受扫描打印文件）送达招标人联系人进行核验，对于国外制造商授权书原件，建议投标人提前准备以满足核验原件期限要求。投标文件中提供的制造商授权书可在制造商官方网站上查询并核验一致的或纸质投标已递交制造商授权书原件的，可免于送交原件核验。核验结果不一致的，将按照提供虚假投标资料处理；未能在规定期限内提供原件的，将视为不如实提供材料处理。上述两类情况将取消中标候选人资格及中标资格，并按照中国海油相关制度规定给予禁用等处理； 联 联网

先变更为：1）在有效期内注水泵（往复式）制造商唯一授权书原件 (制造商授权书中的签名和盖章必须是原件）。 受招标人委托对下列产品及服务进行国际公开竞争性招标，于 $2025-$ 03-25在中国国际招标网发布变更公告。本次招标采用传统招标方式，现邀请合格投标人参加投标。

1、招标条件

项目概况:5套注水泵橇（往复式）安装在HZ19-6DPPA平台的底层甲板。资金到位或资金来源落实情况:已落实项目已具备招标条件的说明:已具备 盗联网

2、招标内容

招标项目编号:0704-2540JDCP5594
招标项目名称:有限深圳-惠州25-4油田综合调整/惠州19-6油田5d井区开发项目往复式注水泵
项目实施地点:中国广东省

招标产品列表(主要设备):

	序号产品名称	数量简要技术规格		备江
	注水泵 (往复式)	5套	往复式注水泵，排量60m²/h，吸入压力41~51kPaG，排出压力26500kPaG

3、投标人资格要求

投标人应具备的资格或业绩:对投标人的资格和业绩要求： Requirements for Qualification and reference of Bidder:

（1）资格要求

Requirements for Qualification of Bidder

A.★制造商要求:

所投注水泵（往复式）为境内产品：投标人需是注水泵（往复式）的制造商。所投注水泵（往复式）为境外产品：允许注水泵（往复式）的制造商或取得注水泵（往复式）制造商唯一授权的成撬商或代理商投标。一个制造商对同一品牌同一型号的注水泵（往复式），仅能委托一个成橇商或代理商参加投标。

投标人为代理商或成撬商时，应得到本次投标注水泵（往复式）制造商的唯一合法授权，并需在投标时提供以下材料（制造商代表签字或盖制造商代表人名章或盖制造商公章）：

1）在有效期内注水泵（往复式）制造商唯一授权书原件 (制造商授权书中的签名和盖章必须是原件）。

2）注水泵（往复式）制造商提供承诺函（格式自拟），承诺投标所投产品为制造商工厂生产。

A. ★Manufacturer requirement:

Water Injection Pumps (Reciprocating) Offered from within the PRC Customs Territory: Bidders must be the manufacturer of the Water Injection Pumps (Reciprocating). Water Injection Pumps (Reciprocating) Offered from within the PRC Customs Territory: The manufacturer of the Water Injection Pumps (Reciprocating) or the sole authorized contractor or agent of the Water Injection Pumps (Reciprocating) manufacturer is allowed to bid. 联网 联网

A manufacturer can only appoint one skidder or agent to participate in the bidding for the same brand and model of the Water Injection Pump (Reciprocating).

When the bidder is an agent or contractor, they shall obtain the sole legal authorization of the manufacturer of the water injection pump (reciprocating) for this bidding, and shall provide the following materials at the time of bidding (signed by the manufacturer's representative or stamped with the manufacturer's representative's name seal or official seal):

1. The original of the sole authorization letter from the manufacturer of the Water Injection Pumps (Reciprocating) within the validity period (the signature and official seal shall be original);

2. The manufacturer of the water injection pump (reciprocating) shall provide a commitment letter (in a self drafted format), promising that the products submitted for bidding will be produced by the manufacturer's factory.

B.★中国境内投标人应承诺往复泵在其品牌制造厂生产，同时承诺在供货时提供产品原产地证明。 招标人不接受贴牌产品； B.★The domestic BIDDER should promise the reciprocating pumps are produced in its brand own manufactory. And overseas BIDDER promise to provide certificate of origin. The Purchaser does not accept the OEM product; 联网

C.★营业执照：如果投标人为境内注册公司，投标人需提供合法有效的企业法人营业执照、税务登 记证及组织机构代码证或证照合一的营业执照； 如果投标人为境外注册公司，需提供有效的公司登记注册证明； C.★Business licence: The bidder within the customs territory shall provide valid independent legal person business license, tax registration certificate, organization code certificate, or combined certificate and business license; The bidder outside the customs territory shall provide valid certificate to prove valid business registration certificate. 联网 D.★投标人所投产品的制造商须具备有效的GB/T19001或ISO9001质量体系认证证书，国内认证机构 签发的证书应可在中国国家认证认可监督管理委员会网站核实。如果有 国家相关部门发布的最新体系标准，以最新体系标准为准。投标时需提供原件扫描件（原件备查 ）； 心联网台 联W D. ★The manufacturer of the bid products shall have valid GB/T19001 or ISO9001 quality system certification, and the certificates issued by domestic certification bodies can be verified on the website of Certification and Accreditation Administration of China . If there are the latest system standards issued by relevant state departments, the latest system standards shall prevail. The scanned copy of the original shall be provided when bidding (for reference of the original)；

E. ★是否接受联合体投标：否 心联网玛标投标车E. ★Joint Venture: Not Accepted 电F. 未领购招标文件是否可以参加投标：不可以F. Bid without the bidding documents: NOT Available

（2）★资质要求及证明文件Requirements of Qualification of Bidder and Certificate注水泵（往复式）的设计和制造需满足API674标准（最新版），并且注水泵制造商厂家需在投标时提供有效的API Q1证书，且可以在官核实。 必联

The design and manufacturing of the water injection pump (reciprocating) must comply with the latest version of API674 standard, and the manufacturer of the water injection pump must provide a valid API Q1 certificate at the time of bidding, which can be found on the official website（ ）Verify.

（3）★业绩要求Requirement for Bidder's reference:
投标人需满足以下所有要求：
联网
The Bidder needs to meet all below requirements:

1. 2014年1月1日至投标截止日（以合同签署时间为准），投标人所投产品的制造商或成撬商应具有 至少2个合同的注水泵(往复式)的供货业绩，且均满足：⑴泵设计和制造满足API674最新版标准 ；⑵泵排量不小于 $60\mathrm{m}^{3}/\mathrm{h}$ ；⑶泵出口压力不小于26500kPaG；⑷海水介质工况。投标人提供的业绩合 同若非制造商直接签订，但合同中的往复式注水泵的制造商与本次所投产品中往复式注水泵的制造 商一致，也予以认可。
   1.From January 1, 2014 to the bid deadline date (subject to the contract signing time), the manufacturer or skid manufacturer of the bidder's bid products shall have at least 2 contracts of water injection pump (reciprocating) and its supporting system supply performance, and meet the following requirements: (1) pump design and manufacturing meet the latest version of API674 standards; (2) Pump displacement is not less than

60m³/h; (3) Pump outlet pressure is not less than 26500kPaG; (4) Performance requirements under seawater medium. If the performance contract provided by the bidder is not directly signed by the manufacturer, but the manufacturer of the Water Injection Pumps (Reciprocating) in the contract is consistent with the manufacturer of the Water Injection Pumps (Reciprocating) in the invested product, it is also recognized.

2.投标人须按规定格式提交业绩表，并提交相关业绩证明文件。业绩证明文件包括：1）销售合同和 2）用户签字或盖章的到货验收材料（到货验收单或调试验收报告或其他可以证明合同项下货物已经 到货验收的有效证明材料）。投标人所提交的业绩证明文件必须至少体现以下内容：合同签署时间 、合同签署页（国内贸易合同应有双方盖章，国际贸易合同应有双方签字或盖章）、制造商名称、 货物名称、泵设计和制造标准、泵排量、泵出口压力、输送介质、用户签字或盖章的到货验收材料 。联网 一联网 联网
未提交业绩证明文件，或通过所提供的业绩证明文件无法认定满足上述业绩要求的，均视为无效业 绩。
2. The bidder shall submit the performance table in the prescribed format, and submit the relevant performance certification documents. Performance proof documents include: 1) Sales contract and 2) arrival acceptance materials signed or sealed by the user (arrival acceptance sheet or debugging acceptance report or other effective
certification materials that can prove that the goods under the contract have arrived for acceptance). The performance documents submitted by the bidder must at least reflect the following contents: Contract signing time, contract signing page (domestic trade contracts should be sealed by both parties, international trade contracts should be signed or sealed by both parties), manufacturer name, goods name, pump design and manufacturing standards, pump displacement, pump outlet pressure, transport medium, user signature or stamped arrival acceptance materials.

Failure to submit performance documentation, or through the performance documentation provided cannot be determined to meet the above performance requirements, shall be regarded as invalid performance.

是否接受联合体投标:不接受未领购招标文件是否可以参加投标:不可以